

1997  PhD, Scuola Normale Superiore di Pisa, Italy  1997  2004  Postdoctoral Associate, Max Planck Institute for Mathematics in the Sciences, Leipzig  2004  Habilitation in Mathematics, University of Leipzig  2004  2008  Professor (C4), University of DuisburgEssen  Since 2008  Professor (W3), Institute for Applied Mathematics, University of Bonn 


My research activity focuses on variational problems with applications to materials science, in particular in elasticity and plasticity. One key theme is the elastic behavior of thin sheets. The starting point was a variational analysis of blistering in thin films [1], which contributed to a new understanding of the origin of microstructure in these systems. I then turned to the situation where compressive Dirichlet boundary conditions by confinement, as in an obstacle problem. The optimal scaling turned out to be different, being proportional to the thickness to the power [3]. A second line of thought focused on variational models in crystal plasticity and their relaxation. An explicit relaxation of a geometrically linear model in which finitely many slip systems are active was obtained in [4], and applied to simulate numerically an indentation test in [5]. At a finer scale, a linetension model for dislocations was derived in [10,7].
Future work will address interaction between different defects, such as damage and fracture, or density of interstitials and motion of dislocations. At the same time I intend to address microstructure formation in situations which cannot be addressed purely by energy minimization, such as plastic deformation under nonmonotonous loadings, or fracture propagation, or cycling in phase transformation in shapememory alloys. This will involve both the study of pathdependence in inelastic deformation and the study of hysteresis, and can be attacked by macroscopic rateindependent models or at a more microscopic level using transitionstate theory.


HIM Trimester on “Mathematical challenges of materials science and condensed matter physics'',
organizer, 2012
Project “From pair potentials to macroscopic plasticity”
within DFG Collaborative Research Center SFB 1060 “The Mathematics of Emergent Effects”,
jointly with Stefan Müller and Michael Ortiz
Project “Hysteresis and microstructure in shape memory alloys”
within DFG Collaborative Research Center SFB 1060 “The Mathematics of Emergent Effects”,
jointly with Barbara Zwicknagl
Project “Numerical optimization of shape microstructures”
within DFG Collaborative Research Center SFB 1060 “The Mathematics of Emergent Effects”,
jointly with Martin Rumpf


Research Area B My research activity focuses on variational problems with applications to materials science, in particular in elasticity and plasticity. One key theme is the elastic behavior of thin sheets. The starting point was a variational analysis of blistering in thin films [1], which contributed to a new understanding of the origin of microstructure in these systems. A simplification of the blistering model leads to the scalar AvilesGiga functional, which was studied in [2]. I then turned to the situation where compressive Dirichlet boundary conditions by confinement, as in an obstacle problem. The optimal scaling turned out to be different, being proportional to the thickness to the power [3].
A second line of thought focused on variational models in crystal plasticity and their relaxation. An explicit relaxation of a geometrically linear model in which finitely many slip systems are active was obtained in [4], and applied to simulate numerically an indentation test in [5]. The situation in a geometrically nonlinear setting is considerably more subtle. The relaxation for an elastically rigid problem with oneslipsystem was obtained in [6]. At a finer scale, selfsimilar dislocation microstructures have been related to HallPetch effect [4] and a linetension model for dislocations was derived in [7]. The study of models of brittle fracture required a detailed analysis of the space SBD [8].
In the geometrically nonlinear setting, the microscopic significance of the multiplicative decomposition in crystal plasticity was discussed in [9]. 


[ 1] Hafedh Ben Belgacem, Sergio Conti, Antonio DeSimone, Stefan MÃ¼ller
Energy scaling of compressed elastic filmsthreedimensional elasticity and reduced theories Arch. Ration. Mech. Anal. , 164: (1): 137 2002 DOI: 10.1007/s002050200206[ 2] Sergio Conti, Camillo De Lellis
Sharp upper bounds for a variational problem with singular perturbation Math. Ann. , 338: (1): 119146 2007 DOI: 10.1007/s0020800600702[ 3] Sergio Conti, Francesco Maggi
Confining thin elastic sheets and folding paper Arch. Ration. Mech. Anal. , 187: (1): 148 2008 DOI: 10.1007/s0020500700762[ 4] Sergio Conti, Michael Ortiz
Dislocation microstructures and the effective behavior of single crystals Arch. Ration. Mech. Anal. , 176: (1): 103147 2005 DOI: 10.1007/s0020500403532[ 5] Sergio Conti, Patrice Hauret, Michael Ortiz
Concurrent multiscale computing of deformation microstructure by relaxation and local enrichment with application to singlecrystal plasticity Multiscale Model. Simul. , 6: (1): 135157 2007 DOI: 10.1137/060662332[ 6] Sergio Conti, Florian Theil
Singleslip elastoplastic microstructures Arch. Ration. Mech. Anal. , 178: (1): 125148 2005 DOI: 10.1007/s0020500503718[ 7] Sergio Conti, Adriana Garroni, Stefan MÃ¼ller
Singular kernels, multiscale decomposition of microstructure, and dislocation models Arch. Ration. Mech. Anal. , 199: (3): 779819 2011 DOI: 10.1007/s0020501003337[ 8] Sergio Conti, Matteo Focardi, Flaviana Iurlano
Integral representation for functionals defined on SBD^p in dimension two Arch. Ration. Mech. Anal. , 223: (3): 13371374 2017 DOI: 10.1007/s002050161059y[ 9] Celia Reina, Sergio Conti
Incompressible inelasticity as an essential ingredient for the validity of the kinematic decomposition {\boldF=\boldF^{e}\boldF^{i}} J. Mech. Phys. Solids , 107: : 322342 2017 DOI: 10.1016/j.jmps.2017.07.004[ 10] Sergio Conti, Adriana Garroni, Michael Ortiz
The linetension approximation as the dilute limit of linearelastic dislocations Arch. Ration. Mech. Anal. , 218: (2): 699755 2015 DOI: 10.1007/s0020501508697[ 11] Sergio Conti, Adriana Garroni, Stefan MÃ¼ller
Dislocation microstructures and straingradient plasticity with one active slip plane J. Mech. Phys. Solids , 93: : 240251 2016 DOI: 10.1016/j.jmps.2015.12.008[ 12] C. Reina, S. Conti
Kinematic description of crystal plasticity in the finite kinematic framework: a micromechanical understanding of F=F^{e}F^{p} J. Mech. Phys. Solids , 67: : 4061 2014 DOI: 10.1016/j.jmps.2014.01.014[ 13] Sergio Conti, Georg Dolzmann
On the theory of relaxation in nonlinear elasticity with constraints on the determinant Arch. Ration. Mech. Anal. , 217: (2): 413437 2015 DOI: 10.1007/s0020501408359





2008  79th Annual Meeting of GAMM, Bremen  2008  SIAM, Mathematical Aspects of Materials Science, Philadelphia, PA, USA  2011  ICIAM, Vancouver, BC, Canada  2016  European Congress of Mathematics, Berlin 


Peter Gladbach (2016): “A phasefield model of dislocations on parallel slip planes”,
now Researcher, Mathematics Institute, University of Leipzig
Johannes Diermeier (2016): “Analysis of Martensitic Microstructures in ShapeMemory Alloys: A Low VolumeFraction Limit”,
now Researcher, Institute for Applied Mathematics, University of Bonn


 Master theses: 9
 Diplom theses: 3
 PhD theses: 3


Download Profile 